|Type||True Density||Crush Strength (Psi)||Crush Strength (MPa)||Particle Size(μm)||Application Suggestion|
|(g/cm³)||Minimum Fractional Survival≥80%||Minimum Fractional Survival≥80%||D10≤||D50≤||D90≤|
|H60||0.57～0.63||8000||55||25||50||85||With the performance of hydrophilicity and lipophilicity,and widely used in composite material、adhesive and painting etc.|
Glass bubble & Hollow glass microsphere's applications are in the fields of thermal insulation coating, putty, plastic casting polyester, FRP, SMC(BMC), radome, synthetic foam, adhesives, printed circuit board substrate, RTM, bowling, fan blades, & caulking materials, emulsion explosives, golf, sealant, pipeline insulation materials, artificial marble, PVC, low density oil drilling, light cement, and other deep-sea buoy etc.
To solve industrial problems
Application of hollow glass microspheres in paint
Hollow glass microspheres have the smallest surface area and low oil absorption rate, can significantly reduce the consumption of other components in paint.
The vitrified surface of glass microspheres can realize the chemical corrosion resistant, and reflexaction on light. Therefore, the paint can prevent from fouling, corrosion, UV, yellowing and scratching etc.
Thin gas inside the hollow glass microspheres with compact arrangement, makes low thermal conductivity, so that paint coating has a very good effect on heat insulation.
Hollow glass microspheres can effectively enhance the fluidity and smoothness of coating.
Hollow glass microspheres contain gas inside, so it has a good contractility resistance to hot and cold, thus enhancing the flexibility of coating, greatly reducing the cracking and peeling of the coating due to thermal expansion and contraction.
On premise of high filling level, the viscosity of paint will not be significantly increased, thus reducing the usage of solvents. It can reduce toxic gas emissions in the process of painting, and VOC indicator can be effectively reduced.
Dosage recommendation:The addition is normally about 10-20% of the total weight. Adding methods are proposed as follows: Last step. The hollow glass microspheres are proposed to add at the last step, and dispersed with low-speed, low shearing force mixing equipment. Due to its good liquidity,small friction, so it willeasily dispersed into mixture to completely keep wet within a short time. Through slightly extending mixing time can achieve uniform dispersion. Hollow glass microspheres are inert and non-toxic. Due to its light weight, attention should be specially paid when adding. We recommend adding the microspheres by step, that is, the addition quantity is 1 / 2 of the remaining beads each time. It can well avoid the microspheres floating into the air and make it disperse even more completely.
Application of hollow glass microspheres in the plastic
Hollow glass microspheres are used as filler of ultra-high molecular polyethylene. It is not only used as solid lubricant in process, but can modify the comprehensive mechanical properties of the ultra-high molecular polyethylene to improve its strength and abrasion resistance.
Nylon 6 with hollow glass microspheres has a higher tensile strength, impact strength, hardness and other improved mechanical properties and can prevent the material aging caused by the light and heat. With the increase of glass microspheres content, the Martin’s temperature of materials rises. It can used in the production of bearings, cameras, furniture and its accessories;
Hollow glass microspheres are added into rigid PVC to manufacture profiled materials, pipes and plates. These materials have good stability in dimension, then their the rigidity, heat resistance, productivity will be improved;
Filled into ABS，this can improve the size stability of material, reduce shrinkage, improve the compressive strength and flexural modulus, and improve the performance of the surface paint. So it can be widely used in production of TV cabinet, automotive plastic parts;
Filled into epoxy resin，it can reduce the material’s viscosity and improve the mechanical properties. So it can be used in production of composite foam plastic, deep-sea submarine, lifeboat, etc.
Filled into unsaturated polyester. It decreases the shrinkage and water absorption of materials, increase its wear resistance. Meanwhile, less space is produced when laminated and coated. So it can be applied in production of FRP products etc.
Application of hollow glass microspheres in the synthetic foam board
The composite material with hollow glass microspheres and resin is commonly referred as synthetic foam board, its main characteristics is low density. With high mechanical properties, it is a wide set of multifunctional composite materials for vibration damping, insulation, fire prevention. Now it is mainly used in manufacturing of aircraft, spacecraft, and ship etc. The synthetic foam with addition of hollow glass microspheres has not only the porous structure, but also makes core materials own low moisture absorption and high compressive strength due to its closed cell structure.
Application of hollow glass microspheres in the exploitation of oil and gas fields
Hollow glass microspheres itself is inert without pollution. As a continuous medium, low density drilling fluid with addition of hollow glass microspheres was incompressible, and all wells are uniform in density. Sludge cakes formed have good lubrication, reducing the risk of sticking. It is technically infeasible for drilling large deviated wells and horizontal wells since the recycled micro-foam and air drilling technology can not deliver MWD signal. However, hollow glass microspheres have an irreplaceable advantage for it can not affect the system signal.
Hollow glass microspheres have a good rolling performance, and it can increase the drilling rate, and significantly improve the drilling effectively.
Drilling fluid with hollow glass microspheres has feature of high temperature resistance, high pressure resistance, stability, durability, and can be recycled.
With the increase of pressure, low-density slurry cementing with hollow glass microspheres were adopted to consolidate the wells to prevent or reduce leakage, increase the cement top. It plays a significant role in increasing the exploration reserves, improving single well production, and effectively developing underground oil and gas resources so as to solve complex problems.
Sinosteel Maanshan New Material Technology Co., Ltd based on technical innovation and excellent quality, it can provide can provide standard products and customized product. Since its established, the company has successfully developed various specifications of high-performance Hollow Glass Microsph...Learn More>>
Hollow Glass Microspheres H38Hs will have a significant influence on end products when we choose the glass microspheres reasonable. Therefore, to choose a suitable grades for our customers is very important. We can offer comprehensively product series to meet your demands....Learn More>>