Archive for the ‘glass beads’ Category

In recent years, the demand for sealant in the construction field has been increasing, among which the silicone sealant is widely used and has a large amount. The silicone sealant is prepared with polysiloxane as the main raw material, and its molecular chain is composed of siloxane chain, which is cross-linked to form a network of siloxane chain skeleton structure during the curing process. The bond energy of Si-0 (444 kJ/mol) is very high, which is not only much higher than the main chain bond energy of other ordinary polymers, but also higher than the UV light energy (399 kJ/mol). Therefore, Si-0 has excellent high and low temperature resistance, weather resistance and UV light aging resistance.

5235 special silicone modified polyester resin is a specially treated silicone modified polyester resin with excellent film-forming property, high gloss, high temperature resistance, high hardness baking resin, excellent physical compatibility and excellent storage stability. The hardness reaches 7H after complete curing on stainless steel plate.

1) High hardness and good toughness: the surface hardness of stainless steel substrate can reach 7H after curing and film forming;

2) Good adhesion: it can reach grade 0 on metal substrates such as stainless steel, and some substrates can reach grade 1; 3) High fullness, high gloss, leveling;

4) High transparency: the paint film is colorless and transparent, with light transmittance ≥ 92%; (Various colors can be modulated by yourself)

5) Good heat resistance: varnish resin can withstand 350 ℃ high temperature for a short time;

6) With excellent storage stability, it can grind various high-temperature resistant color pastes

7) Excellent compatibility with any other silicone polyester resin

8) It can be solidified to form film in the temperature range of 180-280 ℃

Application range of resin:

1. Used separately for high-temperature resistant coatings, such as hairpin coating, non-stick pot coating, high-temperature resistant industrial coating, etc

2 Grind various high-temperature resistant color pastes

3. Mix with other resins to improve heat resistance and luster

4. Replacement of general nano-silicone resin

In addition, silicone sealant is also a good adhesive material. Its adhesive performance to glass is very excellent, and it is often used for sealing and bonding of double-layer insulating glass. Reinforcing filler accounts for a relatively high proportion in the formula of silicone sealant, and the commonly used ones include Nanomaterial calcium carbonate, fumed silica, carbon ink, etc. When the nanomaterial calcium carbonate is used as reinforcing filler, the dosage can reach 60% of the total mass of the system. In addition, some silicone sealants will also add incremental fillers to reduce costs, adjust and improve thixotropy and fluidity. The commonly used incremental fillers are heavy calcium carbonate. The common feature of the above fillers is that the density is high, such as the density of Nanomaterial calcium carbonate is 2.7g/cm3, which also leads to the high density of the final product sealant, and the density of most silicone sealant is about 1.5g/cm3. Hollow glass microsphere, also known as hollow glass microsphere, is a lightweight inorganic powder material developed in recent years.

Hollow glass beads are borosilicate glass formed at high temperature (>1400 ℃) and have stable chemical properties. The hollow glass bead is a hollow, thin-walled closed spherical structure with thin gas inside. This special structure makes it have the characteristics of low density, low thermal conductivity and high compressive strength. The true density of hollow glass bead is 0.12-0.70g/cm3, and the thermal conductivity is 0.038-0.085 W/(m · K). It can be used as a semi-reinforcing filler in silicone sealant, effectively reducing the density and thermal conductivity of the sealant, and also improving the thermal deformation temperature of the sealant. In addition, hollow glass beads generally do not react with substrates or other substances, and are suitable for a variety of systems.

Reflective glass beads are widely used in reflective materials such as reflective cloth, reflective coating, reflective webbing, screen printing, reflective hot-melt film, reflective leather, reflective wire, reflective ink, reflective paint high-strength reflective film, etc.

Ingredients: silicon dioxide, barium carbonate, titanium dioxide, etc

Appearance: white, gray reflective sphere reflector

Refractive index: nd ≥ 1.97, nd ≥ 1.93, nd ≥ 2.2

Specification: 120 mesh, 200 mesh, 280 mesh, 325 mesh, 400 mesh, 500 mesh, 600 mesh

Transparency: ≥ 95%

Roundness: ≥ 95%

Features: good corrosion resistance, high temperature resistance, excellent reflective effect,

Density: 4.1g/cm3

Temperature resistance: ≥ 850 ℃

Oil absorption: 28 ± 2.5g/100g

PH value: 6-7

Adding proportion: oil blending 15-30%

Storage method: ventilated, dry and sealed

 

 

Colored glass beads have uniform particle size, round particles, rich colors and beautiful colors. Good compatibility with various resins, with good color fastness, acid resistance, chemical solvent resistance, heat resistance, low oil absorption and other characteristics. It is widely used in many kinds of products such as architectural decoration, sewing agents, children’s toys, handicrafts, lighting, etc.

 

How to Reduce Density of Rubber Vacuum Glass Bead Foaming Agent Special for Rubber Weight Reduction

Why rubber has high density;

The density of the rubber without filler is 0.9g/cm, but the rubber needs to add inorganic filler because of its strength, temperature resistance, shrinkage resistance, cost reduction and other characteristics. The filler density is generally 2.5-3.6, which will greatly increase the weight, leading to the rubber density exceeding the standard.

Inorganic filler powder

Methods for reducing the density of rubber;

The vacuum glass beads are added to the rubber. The density of the vacuum glass beads is 0.23-0.28g/cm, 3-5 times lighter than the rubber. The compressive strength is 35-42MPA. It has high strength and does not crush. It can be filled into rubber and other materials to effectively reduce the weight to meet the density standard.

Vacuum glass beads are often used to replace foaming agents in rubber soles. Because of their high strength, strong weather resistance, high hardness, and strong aging resistance, vacuum glass beads will not collapse for a long time after they are made into soles, delaying their service life.

Real shot of vacuum glass bead

Why vacuum glass beads can reduce weight;

Vacuum glass bead is a kind of bubble type ultra-fine inorganic powder. The microscopic view is closed spherical hollow particles. The glass bead is filled into the resin, plastic and rubber to achieve foaming effect and effectively reduce the product density.

Vacuum glass bead morphology;

Vacuum glass bead is a kind of low density inorganic white solid powder, which is made by chemical method. It presents spherical vacuum powder under a microscope. The density of conventional products is generally 0.15-0.8g/cm, and it is often used for thermal insulation coatings, plastic foaming, rubber weight reduction, etc.

Plastic anti warping glass beads;

The vacuum glass bead can prevent warping, reduce shrinkage, resist high temperature, fire and other characteristics after being added into the plastic. The recommended usage is 7-20%, which is adjusted according to the product characteristics.

Vacuum glass beads are widely used;

It can be used for reflective coatings, silica gel pads, silica gel products, resins, thermal insulation coatings, thermal insulation coatings, thermal insulation layers, thermal insulation paints, thermal insulation intermediate coatings, rubber soles, rubber pads, yoga mats, reflective coatings, thermal insulation coatings, printing coatings, plastic products, plastic plates, wood plastics, man-made boards and other products with wide applications and strong chemical stability.

FAQ;

Q: The role of plastic filled hollow glass beads;

Answer: Hollow glass beads have the effects of low density, insulation, light weight and heat insulation. Adding them to plastics can reduce the weight. Increase liquidity.

Q: The effect of insulating glass beads used in thermal insulation coatings;

Answer: After insulating glass beads are added to the thermal insulation coating, the thermal insulation effect of the coating can be greatly enhanced.

Q: What is added to rubber to reduce density;

Answer: The use of vacuum glass beads can effectively reduce the density, increase the volume and enhance the overall performance of rubber.

Q: What is the thermal conductivity of the vacuum glass bead;

Answer: The special thermal conductivity of nano water-based thermal insulation coating is 0.03, which effectively reduces the performance of 15-25 ℃.

Sinosteel Maanshan Mining Research Institute Co., Ltd. updated the review status of listing application on December 19, and the company’s IPO application has been accepted.

Tongbi Finance and Economics learned that the company’s predecessor, “Research Institute of Ferrous Metallurgical Mines of the Ministry of Metallurgical Industry”, was founded in 1963 and was a key scientific research institute directly under the former Ministry of Metallurgical Industry. The company has long been engaged in professional services for comprehensive utilization of mineral resources, providing customers with technical services and technical engineering services in mining, mineral processing, rock and soil, mine safety and environmental protection, etc; At the same time, the company pays attention to the technical research and development of new materials such as hollow glass beads, new mining curing materials, carbon aerogel, spherical weighting materials, and realizes the industrial mass production of hollow glass beads.

The State Council and various ministries and commissions have successively issued a series of policies, including the “cornerstone plan”, committed to ensuring the supply security of national strategic mineral resources. With the support of the above national strategies and industrial policies, the industry of comprehensive utilization of mineral resources has broad development space. With the progress of product technology and application technology, hollow glass beads are more widely used in more downstream industries, and the application field will be further expanded in the future. For example, in the field of new energy vehicles, hollow glass beads are used as filling materials to reduce the density and weight of adhesives and interior and exterior trims, achieve lightweight vehicles, improve the physical and chemical properties of adhesives and interior and exterior trims, and improve production efficiency. With the increasing demand of new energy vehicles for lightweight and improving production efficiency, hollow glass bead products are expected to be more widely used in the future. In addition, with the continuous emergence of emerging industries and the continuous development of traditional industries, hollow glass bead products will expand more application fields.

In recent years, the development and utilization intensity of China’s mineral resources has rapidly improved, mining and dressing technology and equipment have made continuous progress, and the comprehensive utilization level has greatly improved. In addition, at present, entrepreneurs all over the country are very optimistic about the development prospects of the sand and gravel industry and the business opportunities for the development and utilization of mineral resources, and have invested in the construction of large and medium-sized sand and gravel production bases. At the same time, major state-owned enterprises and domestic large cement enterprise groups have begun to set foot in and layout the sand and gravel aggregate industry according to the industry development trend. Their involvement has injected new development impetus into the development of the sand and gravel industry and become a new force to promote the high-quality and high-level development of the sand and gravel industry.

China Securities Online News (Wang Luo) The IPO of Science and Technology Innovation Board of China Steel Mining Institute was accepted by Shanghai Stock Exchange a few days ago. The company plans to publicly issue no more than 101372242 shares this time, raising 554 million yuan to invest in national R&D platform R&D capability improvement and mineral resources green and efficient new technology R&D projects, 7000 ton/year high-performance hollow glass beads construction projects, 300 ton/year carbon aerogel new material construction projects, 10000 ton/year spherical weighting material projects and supplementary working capital. Recommendation of CITIC Securities.

According to the public information, the predecessor of Sinosteel Mining Institute, the “Institute of Ferrometallurgical Mines of the Ministry of Metallurgical Industry”, was founded in 1963 and was a key scientific research institute directly under the former Ministry of Metallurgical Industry. The company has long been engaged in professional services for comprehensive utilization of mineral resources, providing customers with technical services and technical engineering services in mining, mineral processing, rock and soil, mine safety and environmental protection, etc. From 2019 to January June 2022, the Company realized operating revenue of 509 million yuan, 566 million yuan, 737 million yuan and 397 million yuan respectively, and realized parent net profit of 58.2824 million yuan, 81.9592 million yuan, 120 million yuan and 74.6404 million yuan respectively in the same period.

The total investment budget of the national R&D platform R&D capability improvement and the mineral resources green and efficient new technology R&D project is 150164400 yuan. The project construction period starts from November 2020. At present, the upgrading and transformation of the two national R&D platforms “National Metal Mine Solid Waste Treatment and Treatment Engineering Technology Research Center” and “National Key Experiment on Metal Mine Safety and Health” are in progress; The construction of “Safety Emergency Industry Research and Training Center”, “Ecological Restoration and Solid Waste Comprehensive Utilization Test and Demonstration Base” has been basically completed; In the future, it is planned to carry out technology research and development in seven research directions, and the R&D achievements will be accepted and transformed in September 2025.

The total investment of the 7000 t/a high-performance hollow glass bead construction project is 140422200 yuan. The hollow glass bead business is one of the company’s main businesses. The implementation of the 7000 t/a high-performance hollow glass bead construction project is to expand the production capacity through new production lines, improve the scale of production and sales business, and promote the development of new material business under the background of the expansion of downstream market demand. The construction period of the project starts from September 2021. At present, the construction of the project plant has been basically completed, the production and commissioning are under way, and the subsequent completion acceptance will be carried out.

The total investment of the 300 t/a carbon aerogel new material construction project is proposed to be 70.3033 million yuan. Carbon aerogel products belong to the company’s new material business, which is the expansion of the company’s existing new material business. This project is the industrial application of the company’s core technology “carbon aerogel industrial preparation technology”. The construction period of the project starts from September 2021. At present, the construction of the project plant has been basically completed, the production and commissioning are under way, and the subsequent completion acceptance will be carried out.

The 10000 t/a spherical weighting material project is planned to have a total investment of 89.2298 million yuan, mainly to build a 10000 t/a spherical weighting material production line, and the main body of implementation is the new materials of the mining institute. The planned construction period of this project is 24 months. At present, the project has not been started.

In the future, the company said that in the field of comprehensive utilization of mineral resources, it will always take the task of overcoming the frontier, common and key core technical problems in the field of national mineral resources, and will always face the scientific and technological frontier of safe, green, efficient development and comprehensive utilization of national low-grade ore, co associated ore, refractory ore, tailings and other mineral resources to provide customers with mining, mineral processing, rock and soil Technical services and technical engineering services in mine safety and environmental protection. In the field of new materials, we will continue to promote the technology research and development and industrial application of the company’s new material business, continue to promote the company’s hollow glass bead products to be more widely used in more downstream industries, and strive to achieve the industrial mass production of new material products such as new mining curing materials, carbon aerogel, spherical weighting materials as soon as possible.

Glass used to be called colored glass because of its twists and turns. When the light passes through the glass, the refracted light is very beautiful. We all know a little about the use of glass, such as cups, windows, decorations, etc. Because of the strong plasticity of glass, it can be made as it is.

Do you know about glass beads? This is a new material that has been developed slowly in recent years. Please see below for the specific use of glass beads.

Use of glass beads:

1、 There are three types of reflective glass beads for roads:

1. It is used for surface spreading during normal temperature and hot melt standard construction, which has a strong reflective effect!

2. As a premixed material, it is premixed in the coating during the production of hot-melt road coating, which can ensure that the marking will reflect light for a long time within its service life

3. This kind of glass bead should be used to sprinkle glass bead on the surface of normal temperature solvent paint marking.

2、 Glass beads for industrial use

1. Purpose

(1) It can be polished on the surface of metal and mould, and can be used as metal abrasive material, which will not damage the working surface and improve the precision of the workpiece.

(2) It can be used for military cleaning and sandblasting, and is used for cleaning turbine, blade, shaft, etc. of aircraft engine.

(3) In the chemical industry, glass beads can be used as additives and reinforcers in the production of plastic, rubber, paint, nylon and other adhesives.

2. Principle

During polishing, compressed air is used as the injection power, glass beads are used as the medium, and the workpiece surface is sprayed at high speed and high pressure for shot peening strengthening and polishing

The processing achieves the purpose of cleaning and improving the processing precision.

3. Advantages

(1) The glass beads made of soda lime glass have good chemical stability, certain mechanical strength and hardness. Therefore, they have great advantages as polishing and grinding materials compared with other grinding materials.

(2) It will not contaminate the processed metal.

(3) It can speed up the cleaning and restore the original cleanliness and finish of the processing materials.

3、 Other applications

1. Glass beads have been widely used in artificial agate, marble, glass fiber reinforced plastic bowling ball and other composite materials as well as high-grade thermal insulation coatings, which can significantly reduce the weight of products and have good thermal insulation effect.

2. Glass bead is a sensitizer with excellent performance for civil emulsion explosives, which can significantly improve the initiation performance of emulsion explosives and extend the storage period. In addition, hollow glass beads can also be used to increase the volume of putty, improve the grinding performance, and improve the acid and alkali resistance.

It can be seen from the above that the use of glass beads is very extensive. Glass beads are a new type of material. With its slow development, it is believed that glass beads will have more and more uses and will be used in more industries. This is to be explored slowly. And glass beads are also used in zebra crossings on urban traffic roads. Under the sun or light, there will be some light flashing to remind everyone to be careful. As for the future use of glass beads, let’s wait quietly.

Opening ceremony of Advanced Powder Material Industrial Park of Sinosteel Mining Institute was held

Yuan Fang and Liu Guowang attended

In the afternoon of November 29, the opening ceremony of the Advanced Powder Materials Industrial Park of Sinosteel Mining Institute was held in the municipal economic development zone. Yuan Fang and Qin Junfeng, municipal leaders, Liu Guowang and Xu Chuanhua, leaders of Sinosteel Group, and Wang Qiang, secretary-general of the municipal government attended the opening ceremony.

It is reported that the advanced powder material industrial park project of Sinosteel Mining Institute was constructed by Maanshan New Material Technology Co., Ltd. of Sinosteel Group with an investment of 2 billion yuan. The project is divided into two phases. In the first phase, three carbon aerogel production lines, two high-performance hollow glass beads production lines, and one spherical weighting material production line will be constructed. After reaching the capacity, the project can produce 1000 tons of carbon aerogel, 15000 tons of high-performance hollow glass microsphere, and 20000 tons of spherical weighting materials annually. It is expected to achieve an annual output value of 1 billion yuan and an annual tax of 60 million yuan.

The first phase of the project was started in October 2021. At present, the main plant has been completed, the equipment has been installed and commissioned, and is in trial production. It will be formally put into production before the end of the year.