Call Us : +86-555-2309441 Email Us : glassbubble@vip.163.com
Glass bubble & Hollow glass microspheres GS25

Hollow Glass Microspheres GS25

High-performance glass bubble & hollow glass microsphere GS25 is a kind of ultra-lightweight inorganic non-metallic material with hollow structure, and it is a versatile and high-performance new lightweight material developed in recent years. It will be the new composite materials at twenty-first century. Its true density is 0.15-0.60g/cm3 with 2-120μm in diameter. It owns features with light weight, large bulky, low thermal conductivity, high compressive strength, smoothly mobility etc.

 

Why should we choose high-performance glass bubble & hollow glass microspheres?

Improving flow properties.

Hollow glass microsphere is a tiny sphere with high ball-type rate. Its ball-bearing effect can improve its mobility and reduce the viscosity and internal stress of resin mixture. Therefore, during processing, less heat is produced in composite materials so as to prevent inadequate lubrication and partial thermal decomposition. It is more likely to extrude when molding, which can not only reduce defects in products, but also improve the production efficiency by 15% -20%.

More substitute ability for resin.

Hollow glass microspheres occupy less surface area, low oil-absorption rate, and evenly disperse in mixture. Its easy compression and integration permit high filler loadings. It significantly reduces the consumption of resins, increases the amount of filler, and effectively reduces VOC indicators, and costs as well.

Low shrinkage and warpage.

Hollow glass microspheres have the feature of isotropism and high-filling, hence the dimensional stability of the product will be very high and it will reduce the shrinkage and warpage. With an appropriate filling ratio, the toughness of the products, impact-resistance and surface hardness can be significantly improved.

More economical by volume.

The density of high-performance hollow glass microspheres is only a fraction of that of the resin. A small amount of hollow glass microspheres will be able to replace heavier materials. When considering the cost per unit volume, rather than cost per unit weight, high-performance hollow glass microspheres can significantly reduce costs.

Adjusting the density of products .

The density of hollow glass microspheres is usually 0.20 ~ 0.60g/cm3, and the density of mineral filler is generally around 2.7 ~ 4.4 g/cm3 (The data adopted is the true particle density). In order to obtain the equal size, 14 kilograms or more of talc must be used to obtain the same effect of 1 kg of hollow glass microsphere. Hence the desired ideal density can be obtained by adding appropriate proportions of hollow glass microspheres.

Type True Density Crush Strength (MPa) Particle Size(μm) Product Features
(g/cm³) Minimum Fractional Survial≥80% D50
GS25 0.25±0.02 5 60 Standard Products

Glass bubble & Hollow glass microsphere's applications are in the fields of thermal insulation coating, putty, plastic casting polyester, FRP, SMC(BMC), radome, synthetic foam, adhesives, printed circuit board substrate, RTM, bowling, fan blades, & caulking materials, emulsion explosives, golf, sealant, pipeline insulation materials, artificial marble, PVC, low density oil drilling, light cement, and other deep-sea buoy etc.

To solve industrial problems

Application of hollow glass microspheres in paint
Hollow glass microspheres have the smallest surface area and low oil absorption rate, can significantly reduce the consumption of other components in paint.
The vitrified surface of glass microspheres can realize the chemical corrosion resistant, and reflexaction on light. Therefore, the paint can prevent from fouling, corrosion, UV, yellowing and scratching etc.
Thin gas inside the hollow glass microspheres with compact arrangement, makes low thermal conductivity, so that paint coating has a very good effect on heat insulation.
Hollow glass microspheres can effectively enhance the fluidity and smoothness of coating.
Hollow glass microspheres contain gas inside, so it has a good contractility resistance to hot and cold, thus enhancing the flexibility of coating, greatly reducing the cracking and peeling of the coating due to thermal expansion and contraction.
On premise of high filling level, the viscosity of paint will not be significantly increased, thus reducing the usage of solvents. It can reduce toxic gas emissions in the process of painting, and VOC indicator can be effectively reduced.
Dosage recommendation:The addition is normally about 10-20% of the total weight. Adding methods are proposed as follows: Last step. The hollow glass microspheres are proposed to add at the last step, and dispersed with low-speed, low shearing force mixing equipment. Due to its good liquidity,small friction, so it willeasily dispersed into mixture to completely keep wet within a short time. Through slightly extending mixing time can achieve uniform dispersion. Hollow glass microspheres are inert and non-toxic. Due to its light weight, attention should be specially paid when adding. We recommend adding the microspheres by step, that is, the addition quantity is 1 / 2 of the remaining beads each time. It can well avoid the microspheres floating into the air and make it disperse even more completely.

Application of hollow glass microspheres in Putty
Compared with the traditional putty, the new type one adding with HGS owns the advantages as follows:
Easy preparation and production, the HGS can be well mixed by a simple low-speed mixer. Its product has a feature of light weight and large volume.
Compared with the ordinary putty, new putty with 5% of hollow glass microspheres, can replace 10 ~ 20% of talc, calcium carbonate, bentonite. Its volume can also be increased 15~25% than that of ordinary putty,and saving resin about 8%.
The oil absorption rate of HGS is much less than that of talc and other fillers. So it has a significantly lower viscosity.
Putty with HGS can be easily polished with advantages of time saving, labor-saving and dust reduction.

Application of hollow glass microspheres in the artificial marble products
The products filled with hollow glass microspheres have advantages of light weight, smooth and beautiful appearance, and lower cost. Increase heat resistance;
2. Lower weight by 20% -35%;
3. Easier processing (drilling, sawing, grinding);
4. Easy polishing, high surface finish quality, lower tool wear resistance;
5. Reduce the costs of packaging and transport;
6. faster module flipping to increase productivity
7. Anti-shrinkage, warpage resistance, improving cracking resistance ability, reducing breakage rate.
8. Reduce the consumption of catalyst

Application of hollow glass microspheres in explosive
The density regulators commonly used in the Emulsion explosives are expanded perlite and chemical blowing agents. The first one has shortcomings of explosive effects limited by its size, strength and oil resistance, lower explosive performance, short-term storage; The second one has the disadvantage of the density of explosives difficult to control, short-term storage and aftereffects. With addition of hollow glass microspheres in the emulsion explosive, all its shortcomings and disadvantages can be overcome. The performance of the detonation is greatly improved and the storage stability is significantly increased. It mainly adopts the sensitization of hollow glass microspheres. Hollow glass microsphere have advantages of low density, low thermal conductivity, low oil absorption rate, particle size and chemical composition control, which makes it highly suitable as emulsion explosive sensitizer. It has significantly improved with less and detonation performance, enhance the storage stability characteristics.

 

Our products are easy to transport and store. The high-performance hollow glass microspheres produced by our company can be packaged with plastic boxes or texture bags and it can be transported in bulk by various ways. Packaging weight depends on the density level of the hollow glass microspheres and the actual needs from ustomers.

In order to extend the storage time , it should avoid humid environment, and be stored in a cool and dry place. After opened, the bag should be firmly resealed. If the package is damaged during the process of shipment and storage, the damaged bag should be replaced by a new one in time.

Since hollow glass microspheres are ultra-fine powder with medium alkaline,it will stimulate the respiratory tracts,if the hollow glass microspheres exposure in air long time, So you should wear a qualified mask or respirator.

In addition: We will provide a separate package to introducing our products in details, and sufficient test samples for you.

Establishing protective work environment,concerning the physical and mental health of the employees,protecting the environment.

The product conforms to national environmental laws,and environment friendly.

Safe and environment friendly.

ENQUIRY
Related products
Glass bubble & Hollow glass microspheres GS20

Hollow glass microspheres GS20

High-performance glass bubble & hollow glass microsphere GS20 is a kind of ultra-lightweight inorganic non-metallic material with hollow structure, and it is a versatile and high-performance new lightweight material developed in recent years. It will be the new composite materials at twenty-firs...

Learn More>>
Glass bubble & Hollow glass microspheres GS32

Hollow Glass Microspheres GS32

High-performance glass bubble & hollow glass microsphere GS32 is a kind of ultra-lightweight inorganic non-metallic material with hollow structure, and it is a versatile and high-performance new lightweight material developed in recent years. It will be the new composite materials at twenty-firs...

Learn More>>
Hollow Glass Microspheres GS38Hs

Hollow Glass Microspheres GS38Hs

Hollow glass microspheres occupy less surface area, low oil—absorption rate, and evenly disperse in mixture. Its easy compression and integration permit high filler loadings. It significantly reduces the consumption of resins, increases the amount of filler, and effectively reduces VOC indicators,...

Learn More>>
Glass bubble & Hollow glass microspheres GS40

Hollow Glass Microspheres GS40

High-performance glass bubble & hollow glass microsphere GS40 is a kind of ultra-lightweight inorganic non-metallic material with hollow structure, and it is a versatile and high-performance new lightweight material developed in recent years. It will be the new composite materials at twenty-firs...

Learn More>>